Airaid 200-168 User Manual download pdf

Installation Instructions

For Part Numbers:

200-168 700-469 Airaid Oiled Media Filter

201-168 701-469 SynthaMax Dry Media Filter - Red

202-168 702-469 SynthaMax Dry Media Filter - Black

203-168 703-469 SynthaMax Dry Media Filter - Blue

2006 Chevrolet Silverado 1500

2007 Chevrolet Silverado Classic 1500

2005-06 Chevrolet Silverado 1500HD/2500HD/3500

2007 Chevrolet Silverado Classic

1500/1500HD/2500HD/3500

4.3L V6, 4.8L V8, 5.3L V8, 6.0L V8, 8.1L V8

Component Identification

1. Airaid Premium Filter 1

2. Rear Air Dam Coated 1

3. MAF Panel Coated 1

4. Filter Adapter 1

5. Weather Strip 21” 1

6. 6-32x 5/16” Screw 5

7. #6 Flat Washer 5

8. 6-32 Keps Nut 5

9. ¼-20 x ½” Button Head Bolt 3

10. ¼” Flat Washer 7

11. M6-1x25 Hex Bolt 4

12. 7 ¼” Rubber Trim 1

1. Disconnect the negative battery cable.

Loosen the 2 hose clamps located at

the Mass Air Flow (MAF) meter.

2. Disconnect the MAF meter wiring harness,

and remove the meter from the factory intake

tube.

3. Remove the factory air filter lid, intake

tube, and base from the vehicle as an assem-

bly. (Hint: pull straight up on the air filter

base to remove, there are no bolts, just grom-

mets).

8. Position the Airaid Cool Air Dam in place

of the factory air box. Secure it to the factory

mounting pad using four M6-1x25 bolts

(#11) and ¼” flat washers (#10). (Caution:

over tightening may distort the cool air dam!

9. Slide the factory MAF meter onto the

filter adapter. Tighten the hose clamp.

(Note: The factory clamp / rubber bushing

must be in place on the inlet to the MAF

meter.) Reconnect the factory intake tube,

MAF meter wiring har ness, and tighten

the clamps.

MAF Meter

7. Install the filter adapter (#4) using three ¼-

20 x ½” button head bolts (#9) and ¼” flat

washers (#10).

4. Using a 10mm socket, remove the five

bolts that secure the factory air filter hous-

ing platform and remove it.

5. Assemble the Airaid Cool Air Dam pan-

els (#2, #3) using five 6-32x 5/16” screws

(#6), #6 flat washers (#7) and 6-32 keps

nuts (#8).

6. Install the 7¼” rubber trim (#12) onto the

side of the Airaid Cool Air Dam.

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

1 2

Summary of Contents

Page 1 - Installation Instructions

Installation Instructions For Part Numbers: 200-168 700-469 Airaid Oiled Media Filter 201-168 701-469 SynthaMax Dry Media Filter - Red 202-168

Page 2 - Tune-Up Kit!

11. Double check your work! Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, bolts, and screws are tight. 12.

Related models: 201-168 | 202-168 | 203-168 |

Comments to this Manuals

No comments

Airaid 200-168 User Manual

Browse online or download User Manual for Air equipment Airaid 200-168. Airaid 200-168 User Manual

Summary of Contents

Related models: 201-168 | 202-168 | 203-168 |

Comments to this Manuals

Related products and manuals for Air equipment Airaid 200-168