Airaid 300-220 User Manual download pdf

2. Squeeze the tab on the connector and discon-

nect the intake temperature sensor wiring harness

on the front of the resonator. Next remove the two

bolts that secure the resonator to the engine. Lift

the resonator up at the front, and remove it from

the vehicle.

3. Remove the factory seal from the throttle body.

4. Using a 13mm socket, remove two bolts hold-

ing the airbox mounting bracket to the inner fend-

er. These bolts will be reused in step #9.

5. Gently twist the air temperature sensor counter-

clockwise and remove it from the resonator. The

sensor will be reinstalled in step #11.

6. Remove and save three grommets from the bot-

tom of the factory airbox. They will be reused in

step #7.

7. Install the three grommets removed in step # 6

into the bottom of the Airaid Cool Air Dam (CAD)

(#3) at the locations shown here.

8. Install the adapter gasket (#25) and filter adapter

(#6) into the CAD using three 1/4-20 x 5/8” bolts

(#8) and flat washers (#9) as shown. Refer to the

line drawing above for reference.

9. Install the CAD into the vehicle by aligning the

grommets over the locating pins on the factory

airbox mount. Reinstall the factory bolts in the

fender that were removed in step #4. Next install

the 1/4”NPT x 1/2” barbed fitting (#19) into the

CAD.

2003 Models: Install the 1/4”NPT plug (#22) in

place of the barbed fitting.

1. Disconnect the negative battery cable!

Loosen the hose clamp on the flexible intake tube

at the airbox lid. Disconnect the breather hose go-

ing into the factory airbox lid. Slide the flexible

tube off of the lid and lift the airbox assembly

straight up and out of the vehicle. 2003 Models:

Disconnect the breather hose from the back of the

resonator.

Component Identification

1. Airaid Premium Filter 1

2. Airaid Intake Tube 1

3. Cool Air Box 1

4. Reducing Coupler 1

5. Urethane Hump Hose 1

6. Filter Adapter 1

7. Weather Strip 33” 1

8. 1/4-20 X 5/8” Hex Bolt 3

9. 1/4” Flat Washer 3

10. #52 Hose Clamp 1

11. #56 Hose Clamp 1

12. #60 Hose Clamp 2

13. Grommet 1

14. Rubber Cap 1

15. 1/2” x 90° Elbow 1

16. #14 Speed Clamp 1

17. #16 Speed Clamp 2

18. #22 Speed Clamp 2

19. 1/4”NPT x1/2” Barbed Fitting 1

20. 1/2” x 3/4” Barbed Connector 1

21. 1/2” x 5/8” Barbed Connector 1

22. 1/4”NPT Hex Plug 1

23. 1/2” x 4 1/2” Breather Hose 1

24. 3/4” x 2” Breather Hose 1

25. Adapter Gasket 1

Installation Instructions

For Part Numbers:

300-220 720-472 Airaid Oiled Media Filter

301-220 721-472 SynthaMax Dry Media Filter - Red

302-220 722-472 SynthaMax Dry Media Filter - Black

303-220 723-472 SynthaMax Dry Media Filter - Blue

2003-08 Dodge Ram 1500/2500/3500

5.7L V8

Gasket

Filter Adapter

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

1 2

Summary of Contents

Page 1 - Installation Instructions

2. Squeeze the tab on the connector and discon-nect the intake temperature sensor wiring harness on the front of the resonator. Next rem

Page 2 - Tune-Up Kit!

16. Double check your work! Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, fasteners, and wiring connections

Related models: 301-220 | 302-220 | 303-220 |

Comments to this Manuals

No comments

Airaid 300-220 User Manual

Browse online or download User Manual for Air equipment Airaid 300-220. Airaid 300-220 User Manual

Summary of Contents

Related models: 301-220 | 302-220 | 303-220 |

Comments to this Manuals

Related products and manuals for Air equipment Airaid 300-220