Airaid 200-196 User Manual download pdf

Installation Instructions

For Part Numbers:

200-196 700-469 Airaid Oiled Media Filter

201-196 701-469 SynthaMax Dry Media Filter - Red

202-196 702-469 SynthaMax Dry Media Filter - Black

203-196 703-469 SynthaMax Dry Media Filter - Blue

2007-08 Cadillac Escalade/ESV/EXT

2007-08 Chevrolet Avalanche

2007-08 Chevrolet Silverado 1500/2500HD/3500HD

2007-08 Chevrolet Tahoe/Suburban 1500/2500

2007-08 GMC Sierra 1500/2500HD/3500HD

2007-08 GMC Yukon/Yukon XL 1500/2500

2007-08 GMC Denali/Denali XL

4.3L V6, 4.8L V8, 5.3L V8, 6.0L V8, 6.2L V8

(GMT-900 Body Style Only)

Component Identification

1. Airaid Premium Filter 1

2. MAF Panel Coated 1

3. Rear Air Dam Coated 1

4. Black Filter Adapter 1

5. Weather Strip 20 3/4” 1

6. 1/4”-20x1/2” SS Button Head 3

7. 1/4” Flat Washer 7

8. M6 x 1.25 Hex Bolt 4

9. 6-32 x 5/16” Screw 5

10. #6 Flat Washer 5

11. 6-32 Keps Nut 5

1. Disconnect the negative battery cable.

Loosen the hose clamp on the end of the factory

intake tube at the Mass Air Flow sensor, next

loosen the hose clamp that holds the Mass Air

Flow sensor to the factory air box.

2. Remove the Mass Air Flow sensor from be-

tween the factory intake tube and the factory air

box. Use caution to retain the rubber coupler on

the Mass Air Flow sensor.

3. Without disconnecting the wiring harness,

set the Mass Air Flow sensor out of the work

area. Next rock the factory air box back and

forth, lift it up, and remove it from the hold

down grommets. There are no bolts holding it

down.

4. Remove the factory air box from the vehicle. 5. Remove 4 bolts, and remove the factory air-

box mounting plate.

6. Assemble the two Cool Air Dam panels (#2)

and (#3) using the five supplied screws (#9),

washers (#10), and nuts (#11), as shown.

7. . Install the filter adapter (#4) into the CAD

using three button head bolts (#6), and washers

(#7).

8. Install the assembled CAD in place of the fac-

tory airbox using four bolts (#8) and washers

(#7). Do not over tighten the bolts.

9. Re-install the Mass Air Flow sensor and cou-

pler onto the air filter adapter (#4), as shown and

tighten the hose clamp. Next re-connect the fac-

tory intake tube to the Mass Air Flow sensor,

and tighten the hose clamp.

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

1 2

Summary of Contents

Page 1 - Installation Instructions

Installation Instructions For Part Numbers: 200-196 700-469 Airaid Oiled Media Filter 201-196 701-469 SynthaMax Dry Media Filter - Red 202-196

Page 2 - Filter Tune-Up Kit!

11. Double check your work! Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, bolts, and screws are tight. 12.

Related models: 201-196 | 202-196 | 203-196 |

Comments to this Manuals

No comments

Airaid 200-196 User Manual

Browse online or download User Manual for Air equipment Airaid 200-196. Airaid 200-196 User Manual

Summary of Contents

Related models: 201-196 | 202-196 | 203-196 |

Comments to this Manuals

Related products and manuals for Air equipment Airaid 200-196