Airaid 300-224 User Manual download pdf (Page 1)

Installation Instructions

For Part Numbers:

300-224 720-472 Airaid Oiled Media Filter

301-224 721-472 SynthaMax Dry Media Filter - Red

302-224 722-472 SynthaMax Dry Media Filter - Black

303-224 723-472 SynthaMax Dry Media Filter - Blue

2002-07 Dodge Ram 1500

4.7L V8

1. Disconnect the negative battery cable.

2003-07 Models A) Squeeze the tab on the

intake air temperature sensor wiring connector

on the back of the factory resonator, and discon-

nect it from the sensor. All Models B) Loosen

two hose clamps. One on the back of the coupler

on the throttle body, and one on the air filter lid

side of the flexible intake tube. C) Disconnect

the crankcase breather hose from the air filter

lid. 2002 & 2003 Models; Disconnect the breath-

2. Slide the flexible intake tube off of the airbox lid and

then lift the complete airbox straight up and out of the

vehicle.

3. Turn the factory air box over and remove 3 of

the 4 grommets. They will be reinstalled in the

Airaid Cool Air Dam in step #8.

4. Using a 10mm socket, remove the two bolts

that secure the intake resonator to the engine,

one on the drivers side, and one on the passen-

gers side of the resonator. Grab the resonator

with both hands at the front and push back and

up to release it from the locator grommet on the

bottom. Remove the resonator from the vehicle.

5. Loosen the factory hose clamp on the coupler

and remove the coupler assembly from the reso-

nator. 2003-07 Models Next gently push in on

the temperature sensor and rotate it to the left

and remove it from the resonator. These parts

will be reinstalled on the Airaid intake tube in

step #12.

6. Install the filter gasket (#21) and filter adapter

(#5) onto the Airaid Cool Air Dam (#3) as

shown using three 1/4” x 5/8” bolts (#7), and

1/4” flat washers (#8). Refer to the line drawing

above for reference.

7. Install the 1/4” NPT x 1/2”Barbed fitting

(#16) into the CAD as shown. 2002-03 Models

Install the 1/4” hex plug (#17) in place of the

barbed fitting.

8. Install the factory grommets removed in step

#3 into the bottom of the CAD at the locations

shown here.

Component Identification

1. Airaid Premium Filter 1

2. Airaid Intake Tube 1

3. Cool Air Box 1

4. Urethane Hump Hose 1

5. Filter Adapter 1

6. Weather Strip 33” 1

7. 1/4-20 X 5/8” Hex Bolt 3

8. 1/4” Flat Washer 3

9. #60 Hose Clamp 2

10. Grommet Plug 1

11. Grommet 1

12. Rubber Cap 1

13. 1/2” x 90° Rubber Elbow 1

14. #14 Speed Clamp 1

15. #16 Speed Clamp 3

16. 1/4”NPT x1/2” Barbed Fitting 1

17. 1/4”NPT Hex Plug 1

18. 1/2” X 3/4” Barbed Connector 1

19. 1/2” x 4 1/2” Breather Hose 1

20. 1/2” x 1/2” Plastic Elbow 1

21. Adapter Gasket 1

Gasket

Adapter

CAD

Filter Adapter Bolts from step #6

9. Remove the two bolts that secure the airbox

mounting bracket to the inner fender. They will

be reinstalled in step #10.

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

1 2

Summary of Contents

Page 1 - Installation Instructions

Installation Instructions For Part Numbers: 300-224 720-472 Airaid Oiled Media Filter 301-224 721-472 SynthaMax Dry Media Filter - Red 302-224

Page 2 - Tune-Up Kit!

17. Double check your work! Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, bolts, and screws are tight. Perio

Related models: 301-224 | 302-224 | 303-224 |

Comments to this Manuals

No comments

Airaid 300-224 User Manual Page 1

Browse online or download User Manual for Air equipment Airaid 300-224. Airaid 300-224 User Manual

Summary of Contents

Related models: 301-224 | 302-224 | 303-224 |

Comments to this Manuals

Airaid 300-224 User Manual Page 1

Browse online or download User Manual for Air equipment Airaid 300-224. Airaid 300-224 User Manual

Summary of Contents

Related models: 301-224 | 302-224 | 303-224 |

Comments to this Manuals

Related products and manuals for Air equipment Airaid 300-224