Airaid 300-165 User Manual download pdf (Page 2)

9. Double check your work!

Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, bolts, and screws are tight.

10. Reconnect the negative battery cable!

Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com

REV.11.4.13

P/N 790-551 Aerosol Spray

P/N 790-550 Squeeze Spray

7. Re-connect the factory breather hose onto the Quick Fit Pan-

el and secure with the #24 speed clamp (#4) as shown.

8. Install the Airaid Premium Filter (#1) onto the Quick Fit

Panel as shown, and tighten the clamp. Install the weather

strip (#3) onto the top of the Quick Fit Panel as shown. (Hint:

Start at one end and work towards the other.)

Thank you for purchasing the Airaid Intake System. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST week-

days for questions regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully inspected and

packaged. Check that no parts are missing, or were damaged during shipping. If any parts are missing, contact Airaid. The air

filter element is protected from direct exposure to water and debris; care should be taken not to drive through deep water. WA-

TER INGESTION IS THE DRIVERS RESPONSIBILITY! The air filter is reusable and should be cleaned periodically.

FILTER IDENTIFICATION

720-440 Airaid Oiled Media 721-440 Airaid SynthaMax Dry Media - Red

722-440 Airaid SynthaMax Dry Media - Black 723-440 Airaid SynthaMax Dry Media - Blue

For your Oiled media filter we

suggest using the AIRAID Filter

Tune-Up Kit!

Synthamax Air Filters do not re-

quire oil. Service air filter as need-

ed by cleaning with common non-

petroleum all-purpose household

cleaner and water. Simple Green®,

Formula 409® or equivalent works

great. Apply cleaner to outside of

air filter and allow to soak. Then

flush filter clean from the inside out

with a garden hose and repeat steps

if necessary. Do not apply high

pressure water or air to clean filter.

Allow filter to air dry and reinstall.

1 2

No comments

Airaid 300-165 User Manual Page 2