Airaid 200-606 User Manual download pdf

Parts List

#1 Poweraid Spacer x1

#2 6mmx65mm Bolts x4

#3 6mm Flat Washers x4

#4 Fiber Gasket x1

#5 3/4” Extension Plate x1

#6 6mm Flat Head Bolt x1

Installation Instructions

Part Number 200-606

Poweraid Spacer For

2014-2015 Chevrolet Silverado

2500/3500

2007-2013

Chevrolet Silverado 2500/3500

GMC Sierra 2500/3500

GMT-900 Series Trucks & SUVs

4.8L, 5.3L, 6.0L, 6.2L

2008-09 Hummer H-2

05-06 Pontiac GTO 6.0L

06-08 Chevrolet Trailblazer 5.3L

06-08 GMC Envoy 5.3L

1. Disconnect the negative battery cable!

Lift up on the front of the and beauty cover and

remove it from the vehicle. Push down on the radia-

tor hose, and separate the tube from the plastic

clamp.

2. Disconnect the breather tube from the intake

tube, by gently pulling towards you. An O-ring is

all that holds it in place. Next loosen the hose clamp

on the intake tube at the throttle body, and at the

Mass Air Sensor, and remove the tube from the ve-

hicle.

Thank you for purchasing the Poweraid Throttle Body Spacer. Please read the instruction manual careful-

ly before proceeding with the installation. Contact AIRAID @ (800) 498-6951 8:00 AM - 5:00 PM MST Weekdays

for questions regarding fit or instructions that are not clear to you. Your Poweraid Throttle Body Spacer was care-

fully inspected and packaged. Check that no parts are missing, or were damaged during shipping. If any parts

are missing, please contact AIRAID.

3. With a 10mm socket remove the two nuts, and

the two bolts that hold the throttle body to the intake

manifold. Without disconnecting the wiring harness,

set the throttle body aside.

4. With a 4mm socket, remove the two studs that

held the throttle body to the intake manifold.

Tools Required For Installation

10mm Deep Socket

4mm, 5/16” Sockets

5/32” Allen Wrench

1 2

Instructions Revision 2
04.04.14 2

Summary of Contents

Page 1

Parts List #1 Poweraid Spacer x1 #2 6mmx65mm Bolts x4 #3 6mm Flat Washers x4 #4 Fiber Gasket x1 #5 3/4” E

Page 2 - 04.04.14

9. Re-install the intake tube using caution to center the intake tube hole over the previously installed grommet. Some adjustment may be required to s

Related models: 200-617

Comments to this Manuals

No comments

Airaid 200-606 User Manual

Browse online or download User Manual for Accessories for air Airaid 200-606. Airaid 200-606 User Manual

Summary of Contents

Related models: 200-617

Comments to this Manuals

Related products and manuals for Accessories for air Airaid 200-606