Airaid 400-231 User Manual download pdf

Installation Instructions

For Part Numbers:

400-231 720-478 Airaid Oiled Media Filter

401-231 721-478 SynthaMax Dry Media Filter - Red

402-231 722-478 SynthaMax Dry Media Filter - Black

403-231 723-478 SynthaMax Dry Media Filter - Blue

2009-2010 Ford F-150 5.4L

2007-14 Ford Expedition 5.4L

1. Disconnect the negative battery cable!

Loosen the two intake clamps and remove the Factory

intake tube.

3. Remove the factory air filter from the lower half of

the airbox.

4. Assemble the two Quick Fit panels (#3 & #4) as

shown using four 6-32 screws (#9) flat washers (#11)

and kep nuts (#10).

5. For F-150 models only:

Fasten the Extension panel (#5) to the outside of the

panel assembly using the remaining 6-32 screws, flat

washers, and kep nuts.

6. A.) Install the Silicone Hump Hose (#7) and two #64

Hose Clamps(#14) onto the Quick Fit assembly. Leave

the clamps loose for now.

B.) Install the assembly onto the lower half of the fac-

tory airbox. Slide the metal tabs into the airbox slots,

and fasten the 3 airbox clips.

7. Install the Silicone Coupler (#6), one #64 Hose

Clamp(#14), and the #52 Hose clamp (#13) onto the

engine air inlet. Leave the clamps loose for now.

8. Transfer the MAF sensor into the Airaid Intake

Tube (#2) and secure using two 8-32 x 1/2” button

head screws (#11). Do Not Use The Factory Torx

Head Screws !

Component Identification

1. Airaid Premium Filter 1

2. Airaid Intake Tube 1

3. Front Panel 1

4. Rear Panel 1

5. Extension Panel 1

6. Silicone Reducer Coupler 1

7. Silicone Hump Hose 1

8. Weather Strip 23” 1

9. 6-32 x 5/16” Screw 9

10. 6-32 Keps Nut 9

11. #6 Flat Washer 9

12. 8-32 x 3/8” Button Head Screw 2

13. #52 Hose Clamp 1

14. #64 Hose Clamp 3

15. T-20 Torx Driver 1

2. A.) Disconnect the Mass Air Flow (MAF) Sensor.

B.) Unfasten the three airbox clips on the left side, and

remove the upper half of the factory airbox.

Tabs

#52

#64

9. A.) Insert the Airaid Intake Tube into the couplers as

shown. Check for alignment, and tighten all clamps.

B.) Re connect the Mass Air Flow Sensor.

Note: Tab is outside

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

1 2

Summary of Contents

Page 1 - 2009-2010 Ford F-150 5.4L

Installation Instructions For Part Numbers: 400-231 720-478 Airaid Oiled Media Filter 401-231 721-478 SynthaMax Dry Media Filter - Red 402-231 722

Page 2 - Tune-Up Kit!

Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com REV.04.09.04 P/N 790-551 Aerosol Sp

Related models: 401-231 | 402-231 | 403-231 | 400-256 | 401-256 | 402-256 | 403-256 |

Comments to this Manuals

No comments

Airaid 400-231 User Manual

Browse online or download User Manual for Air equipment Airaid 400-231. Airaid 400-231 User Manual

Summary of Contents

Related models: 401-231 | 402-231 | 403-231 | 400-256 | 401-256 | 402-256 | 403-256 |

Comments to this Manuals

Related products and manuals for Air equipment Airaid 400-231