Airaid 883-315 User Manual download pdf

Installation Instructions

For Part Number:

883-315 Intake and Snorkel

2014-15 Kawasaki Teryx

2012-15 Kawasaki Teryx 4

750 cc

2. Loosen the clamps on the factory airbox couplers.

3. Remove the factory airbox and couplers from the vehi-

cle.

4. Create the Airbox Assembly by sliding the Top Panel

(#2) into the Bottom Panel (#3). Use four of the 8-32

Thread Cutting Screws (#23) on each side to secure the

panels.

5. Use the two remaining Thread Cutting Screws on the

bottom of the assembly shown.

6. Install the Mounting Brackets (#7) onto both sides of

the Airbox Assembly a shown using the four 1/4-20 x

1/4” Button Head Bolts (#22)

8. Tighten the Air Filter clamp though the access port

on the back side of the Airbox.

7. Slide the Airaid Premium Filter (#1) onto the mount-

ing tube inside the Airbox Assembly. Note the location

of the isolator tab on the filter inside of the box.

9. Install the Blind Grommet (#19) into the access port.

Component Identification

1. Airaid Premium Filter 1

2. Top Panel 1

3. Bottom Panel 1

4. Filter Tray 1

5. Hood Scoop 1

6. Foam Pre Filter 1

7. Mounting Bracket 2

8. Silicone Coupler 1

9. Urethane Cap 1

10. Airbox Lid 1

11. Snorkel Tube 1

12. Snorkel Inlet 1

13. Snorkel Screen 1

14. Foam Prefilter 1

15. 3” Flexible Duct, 40” 1

16. 48 Hose Clamp 4

17. Blind Grommet 1

18. 1/4-20 x 1/2” Button Head screw 6

19. 1/4” Flat Washer 16

20. 1/4-20 x 1/4” Button Head screw 4

21. #8-32 Thread Cutting Screw 10

22. Edge Trim, 36” 1

23. Edge Trim, 10” 1

24. 3” Loop Clamp 2

25. 1/4-20 Speed Nut 2

26. 1 3/4” Loop Clamp 3

27. 1/4-20x 1 1/4” Bolt 3

28. 1/4-20 Nylock Nut 3

29. 8-32 x 3/8 Button Head Bolt 4

30. Torx Screw 4

31. T-20 Torx bit 1

32. Bubble Sticker 1

Tools Required For Installation:

In addition to common hand tools, this installation requires the

use of a : Hand drill, 1/2” Drill Bit, Jig Saw, Center punch, and

hammer.

1. Raise the hood of the vehicle. Locate and disconnect

the negative battery terminal underneath the airbox. Re-

move the four airbox bolts and set them aside. They will

be reused in step 11.

Top Panel

Bottom Panel

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

Page 1

1 2 3 4 5 6

Summary of Contents

Page 1 - Installation Instructions

Installation Instructions For Part Number: 883-315 Intake and Snorkel 2014-15 Kawasaki Teryx 2012-15 Kawasaki Teryx 4 750 cc 2. Loosen the clamps

Page 2

13. Mark the hole locations in each corner using a center punch. 10. Install the Silicone Coupler (#8) and Two #48 Hose Clamps (#18) onto the f

Page 3

25. Carefully insert the Airaid Foam Prefilter (#6) into the Snorkel Inlet. 26. Install the Snorkel Screen (#14) onto the Inlet using the four 8-32 B

Page 4 - Filter Tune-Up Kit!

40. Double check all of your work and re connect the battery. Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 Air

Page 5 - CORRECT SCALE BEFORE CUTTING

1.000 CHECK SIZE OF SQUARE TO CONFIRM CORRECT SCALE BEFORE CUTTING

Page 6

1.00 CHECK SIZE OF SQUARE TO CONFIRM CORRECT SCALE BEFORE CUTTINGDRILL 1/2" HOLES FIRSTTHEN CUT STRAIGHT LINES TO CONNECT HOLESALIGN EDGE WITH B

Comments to this Manuals

No comments

Airaid 883-315 User Manual

Browse online or download User Manual for Air equipment Airaid 883-315. Airaid 883-315 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Air equipment Airaid 883-315