Airaid 200-289 User Manual download pdf

Installation Instructions

For Part Numbers:

200-289 720-472 Airaid Oiled Media Filter

201-289 721-472 SynthaMax Dry Media Filter - Red

202-289 722-472 SynthaMax Dry Media Filter - Black

203-289 723-472 SynthaMax Dry Media Filter - Blue

2006 GMC Sierra 2500HD/3500HD

2007 GMC Sierra Classic 2500HD/3500HD

6.6L V8 Duramax Diesel LLY & LBZ

Component Identification

1. Airaid Premium Filter 1

2. Airaid Intake Tube 1

3. Cool Air Box 1

4. Urethane Hump Hose 1

5. Weather Strip 25” 1

6. ¼ - 20 x 1/2” Button Head Bolt 4

7. ¼” Flat Washer 7

8. 8-32 x 3/8” Button Head Screw 2

9. M6 x 1 x 25mm Hex Bolt 3

10. #72 Hose Clamp 2

1. Disconnect the negative battery cables.

A.) Using a #20 Tor x bit, r emove the two screws

and the Mass Air Flow sensor from the factory intake

tube.

B.) Loosen the hose clamp at the r ubber coupler .

C.) Remove the factor y filter minder and gr ommet

and save them for reinstallation in step # 7.

2. Rock the air filter housing back and forth while

lifting up, and remove the factory intake assembly

from the vehicle. There are only grommets holding it

in place.

3. Using a 10mm socket, remove 5 bolts, and then

remove the factory air filter mounting plate.

4. Install the Airaid Cool Air Box (CAB) (#3) into the

vehicle as shown, replacing the factory air filter. In-

stall three M6-1 x 25mm bolts (#9), and three flat

washers (# 7) thru the bottom of the CAB and into the

factory captured nuts. Leave the bolts loose for now.

5. Install two #72 hose clamps (#10) onto the urethane

hump hose (#4), and then slip the hump hose onto the

end of the factory turbo intake tube as shown. Leave

the clamps loose for now.

6. Slide the Airaid Intake Tube (#2) into the CAB

first, and then into the hump hose. If needed, the fac-

tory turbo intake tube can be adjusted for proper

alignment. Next install four 1/4” button head bolts

(#6), and four flat washers (#7) thru the CAB to se-

cure the Airaid Intake Tube. Now tighten the three

bolts at the bottom of the CAB and the two hose

clamps on the hump hose.

1/4” Button

Head Bolts

& Washers

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

1 2

Summary of Contents

Page 1 - Installation Instructions

Installation Instructions For Part Numbers: 200-289 720-472 Airaid Oiled Media Filter 201-289 721-472 SynthaMax Dry Media Filter - Red 202-289

Page 2 - Tune-Up Kit!

Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com REV.11.15.13 P/N 790-551 Aerosol Spr

Related models: 201-289 | 202-289 | 203-289 |

Comments to this Manuals

No comments

Airaid 200-289 User Manual

Browse online or download User Manual for Air equipment Airaid 200-289. Airaid 200-289 User Manual

Summary of Contents

Related models: 201-289 | 202-289 | 203-289 |

Comments to this Manuals

Related products and manuals for Air equipment Airaid 200-289