Airaid 250-218 User Manual download pdf (Page 1)

Installation Instructions

For Part Numbers:

250-218 720-475 Airaid Oiled Media Filter

251-218 721-475 SynthaMax Dry Media Filter - Red

252-218 722-475 SynthaMax Dry Media Filter - Black

253-218 723-475 SynthaMax Dry Media Filter - Blue

2005-07 Chevrolet Corvette C6

6.0L V8

Component Identification

1. Airaid Premium Filter 1

2. Airaid Intake Tube 1

3. Urethane Hump Hose 1

4. Coupler 1

5. Drivers Side Air Dam 1

6. Passenger Side Air Dam 1

7. Weather Strip 10 1/2” 2

8. 8-32 x 3/8” Button Head Screw 2

9. M4 Pan Head Screw 2

10. #8 Flat Washer 4

11. M4 Clip Nut 2

12. Small Rubber Washer 4

13. #60 Hose Clamp 3

14. #64 Hose Clamp 1

1. Disconnect negative battery cable.

Push the tab on the factory breather hose and discon-

nect it from the fitting in the factory coupler. Loosen

the three hose clamps on the factory intake tube.

2. Lift the factory intake tube up and remove the

Mass Air Flow (MAF) sensor fr om the coupler and

slide it out of the way. Next remove the coupler from

the throttlebody, and then remove the factory intake

tube and filters from the vehicle as an assembly.

5. Remove the two factory grommets from the facto-

ry intake tube. They will be reused in step #6.

3. Remove the barbed fitting from the factory cou-

pler. It will be reused in step #4.

4. Reinstall the barbed fitting removed in step #3 into

the Airaid hump hose (#3) as shown. Install one #64

hose clamp (#14) onto the back of the hump hose,

and one #60 hose clamp on the front.

6. Install the factory grommets removed in step #5

into the Airaid intake tube (#2).

7. Attach the two air dams (#s 5&6) to the Airaid

intake tube as shown using two 8-32 x 3/8” screws

(#8), and two #8 flat washers (#10). Leave the screws

slightly loose for adjustment later. Refer to the line

drawing at the top of this page for reference.

Next install the supplied coupler (#4) onto the Airaid

intake tube as shown using two #60 hose clamps

(#13). Tighten only the clamp on the tube.

8. Install the Airaid Premium Filter into the area in

front of the radiator. It will be attached to the Airaid

intake tube in step #11.

9. Install the hump hose with the #64 hose clamp on

the throttlebody. Adjust it so that the breather hose

aligns with the barbed fitting, and reconnect the

breather. Tighten the hose clamp on the throttlebody.

Reinstall the MAF sensor into the hump hose making

sure the “Flow” arrow is pointing towards the engine.

Tighten the remaining hose clamp.

Factory Tube

Coupler

MAF

#60 Hose Clamp

#64 Hose Clamp

Hump Hose

MAF Sensor

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

1 2

Summary of Contents

Page 1 - Installation Instructions

Installation Instructions For Part Numbers: 250-218 720-475 Airaid Oiled Media Filter 251-218 721-475 SynthaMax Dry Media Filter - Red 252-2

Page 2 - Tune-Up Kit!

12. Double check your work! Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, bolts, and screws are tight. 13.

Related models: 251-218 | 252-218 | 253-218 |

Comments to this Manuals

No comments

Airaid 250-218 User Manual Page 1

Browse online or download User Manual for Air equipment Airaid 250-218. Airaid 250-218 User Manual

Summary of Contents

Related models: 251-218 | 252-218 | 253-218 |

Comments to this Manuals

Airaid 250-218 User Manual Page 1

Browse online or download User Manual for Air equipment Airaid 250-218. Airaid 250-218 User Manual

Summary of Contents

Related models: 251-218 | 252-218 | 253-218 |

Comments to this Manuals

Related products and manuals for Air equipment Airaid 250-218