Airaid 400-246 User Manual download pdf (Page 1)

Component Identification

1. Airaid Premium Filter 1

2. Airaid Intake Tube 1

3. Bottom Panel 1

4. Side Panel 1

5. Air Dam 1

6. CAD Lid 1

7. Battery Mat 1

8. Battery Tie Down 1

9. Weather Strip 29” 1

10. Silicone Hump Hose 1

11. 1/4-20 J Bolt 2

12. Bracket 140 2

13. #64 Hose Clamp 2

14. 1/4-20 x 1/2” Button Head Bolt 10

15. 1/4” Flat washer 10

16. 1/4-20 Flange nut 5

17. 8-32 Thread Cutting Screw 14

Installation Instructions

For Part Numbers:

400-246 720-472 Airaid Oiled Media Filter

401-246 721-472 SynthaMax Dry Media Filter - Red

402-246 722-472 SynthaMax Dry Media Filter - Black

403-246 723-472 SynthaMax Dry Media Filter - Blue

1999-03 Ford F-250/F-350 Super Duty

7.3L V8 Power Stroke

1. Disconnect the battery cables.

Disconnect both the Drivers side and Passenger side

battery cables.

2. A.) Disconnect the filter minder in the top of the

airbox.

B.) Loosen the clamp on the tur bo inlet and unclip

the airbox top to remove the factory intake and airfilter.

3. A.) Remove the factor y batter y cover .

B.) Using a 5/16” socket, remove the factory batter y

hold down.

4. A.) Disconnect the air temp sensor.

B.) Remove the four bolts secur ing the air /batter y

box assembly to the vehicle. Remove the assembly and

set aside. The bolts and air inlet will be reused.

5. Create the Cool Air Dam, or CAD assembly as

shown using the Bottom Panel (#3), Side Panel (#4), and

the 8-32 Thread Cutting Screws (#17). NOTE: Panel

tabs are to be on the bottom of its mating panel.

6. Transfer the air temp sensor from the factory airbox

into the CAD assembly.

7. Transfer the air inlet from the factory airbox assem-

bly into the CAD assembly. The air inlet has an indexing

tab that mates with a slot in the Panel. NOTE:

Vehicles built ``BEFORE 12/7/98'' do not have this air

inlet design. This intake can be used with or without the

factory inlet. It is available from Ford as a special order

part. Ford Part number:

9C675 Engine Air Box Tube7.3L ``FROM 12/7/98''

8. Place the CAD assembly in the engine compartment

and start the four factory bolts from step 4. Leave the

bolts loose for now.

9. Create the Tube assembly. A.) Transfer the factory

grommet and filter minder into the Airaid Intake Tube

(#2). B.) Slide the Hump Hose (#10) and Clamps

(#13) onto the Tube as shown. Leave the clamps loose

for now.

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

1 2

Summary of Contents

Page 1 - Installation Instructions

Component Identification 1. Airaid Premium Filter 1 2. Airaid Intake Tube 1 3. Bottom Panel

Page 2 - FILTER IDENTIFICATION

Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com REV.10.24.13 P/N 790-551 Aerosol Spr

Related models: 401-246 | 402-246 | 403-246 |

Comments to this Manuals

No comments

Airaid 400-246 User Manual Page 1

Browse online or download User Manual for Air equipment Airaid 400-246. Airaid 400-246 User Manual

Summary of Contents

Related models: 401-246 | 402-246 | 403-246 |

Comments to this Manuals

Airaid 400-246 User Manual Page 1

Browse online or download User Manual for Air equipment Airaid 400-246. Airaid 400-246 User Manual

Summary of Contents

Related models: 401-246 | 402-246 | 403-246 |

Comments to this Manuals

Related products and manuals for Air equipment Airaid 400-246