Airaid 450-321 User Manual download pdf

Installation Instructions

For Part Numbers:

450-321 700-461 Airaid Oiled Media Filter

451-321 701-461 SynthaMax Dry Media Filter - Red

452-321 702-461 SynthaMax Dry Media Filter - Black

453-321 703-461 SynthaMax Dry Media Filter - Blue

2012-13 Ford Boss Mustang

2011-14 Ford Mustang GT with Boss 302 manifold

M-9424-M50BR conversion

2. A) Loosen the hose clamps on the factory intake

tube B) Squeeze the clamp and disconnect the resonator

from the air intake tube. C) Carefully depress the hose

lock tabs, and disconnect the crank case breather line

and the brake aspirator line (if equipped, AT models

only). D) Remove the factory intake tube.

3. A) Slide the r ed tab, and disconnect the wir ing har -

ness from the Mass Air Flow sensor (MAF). Carefully

pry the harness anchor from the air box using a screw-

driver. B) Separate the resonator tube from the stand off

attached to the Air box lid. C) Using a 10mm socket, re-

move the bolt securing the air box to the inner fender and

remove the air box assembly. This bolt will be reused in

step 9.

4. Install the Grommets and Fittings into the Airaid intake

tube A) All models will require the use of the 5/8” Fitting

(#19) and the 5/8”Grommet (#20). B) Automatic trans-

mission equipped vehicles will also use the 3/8” Fitting

(#18) and 3/8” Grommet (#21). Manual transmission

vehicles will not need the 3/8” components and will use

the Blind Grommet(#22).

5. Using the supplied Torx driver, remove the MAF sen-

sor from the factory airbox and create the Tube assem-

bly.

A) Slide the Modular Venturi Tube (#3) into the

Airaid intake tube (#2) making sure to align the two slots

for the MAF sensor. B) Install the MAF sensor into the

intake tube using two provided 8-32x3/8” screws (#12).

Do Not Use The Factory Screws!

6. Install the filter adapter (#8) using three 1/4-20 button

head bolts (#10), and flat washers (#11) into the Airaid

Cool Air Box as shown.

8. Install the Cool Air Box into the vehicle. Make sure

that the Air inlet mates with the factory duct, and the two

locating pins on the bottom align with the factory grom-

mets. Next reinstall the factory bolt that was removed in

step #3 through the steel sleeve and grommet and into

the inner fender.

7. Transfer the factory air box mounting grommets. A)

Locate and remove the Two Lower air box mounting

grommets, and install them in the inner fender. B) Re-

move the Upper air box mounting grommet and steel

sleeve, and re-install into the Airaid Cool Air Box

9. Install the hump hose onto the filter adapter using two

#72 hose clamps (#13) as shown. Leave the two hose

clamps loose for now. Transfer the Resonator stand off

from the factory air box into the Cool Air Box.

Component Identification

1. Airaid Premium Filter 1

2. Airaid Intake Tube 1

3. Modular Venturi Tube 1

4. Cool Air Box 1

5. Urethane Hump Hose 1

6. Silicone Reducer 1

7. Urethane Cap* 1

8. Filter Adapter 1

9. Weather Strip 25” 1

10. ¼-20 Button Head Bolt 3

11. ¼” Flat Washer 3

12. 8-32 x 3/8” Button Head Bolt 2

1. Disconnect The Negative Battery Terminal.

Additional Installation Note: This Intake system can

also be installed on a Mustang GT 5.0L with the Boss

intake manifold conversion and contains the fitting re-

quired to connect the brake aspirator line for AT

equipped vehicles.

INSTALL NOTE: If you are installing this kit on a vehicle equipped with a

Power Dome Hood with Heat Extractors we suggest the use of our optional

AIRAID pre-filter (Part #799-469) to give an added layer of protection from the ele-

ments.

Blind Grommet.

13. #72 Hose Clamp 2

14. #64 Hose Clamp 1

15. #56 Hose Clamp 1

16. 60mm Hose Clamp 1

17. Firewall Plug* 1

18. 3/8”Aluminum Fitting 1

19. 5/8”Aluminum Fitting 1

20. 5/8”Grommet 1

21. 3/8”Grommet 1

22. Blind Grommet 1

23. #20 Torx Driver 1

1 2

Summary of Contents

Page 1 - Installation Instructions

Installation Instructions For Part Numbers: 450-321 700-461 Airaid Oiled Media Filter 451-321 701-461 SynthaMax Dry Media Filter - Red 452-32

Page 2 - Tune-Up Kit!

Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com P/N 790-551 Aerosol Spray P/N 790-5

Related models: 451-321 | 452-321 | 453-321 |

Comments to this Manuals

No comments

Airaid 450-321 User Manual

Browse online or download User Manual for Air equipment Airaid 450-321. Airaid 450-321 User Manual

Summary of Contents

Related models: 451-321 | 452-321 | 453-321 |

Comments to this Manuals

Related products and manuals for Air equipment Airaid 450-321