Airaid 350-210 User Manual download pdf

Installation Instructions

For Part Numbers:

350-210 720-243 Airaid Oiled Media Filter

351-210 721-243 SynthaMax Dry Media Filter - Red

352-210 722-243 SynthaMax Dry Media Filter - Black

353-210 723-243 SynthaMax Dry Media Filter - Blue

2011-15 Chrysler 300, Dodge Challenger and Charger

3.6l V6, 5.7L V8 and 6.4L V8 SRT

1. Disconnect The Negative Battery Terminal!

A. Loosen the hose clamp on the factory intake tube.

B. Disconnect the crank case breather line from the

airbox top.

C. Remove the three airbox top screws and remove

the airbox lid and filter.

2. Remove the core support bolt securing the lower half

of the airbox and remove it from the vehicle.

3. Carefully remove the speed clip from the core support

tab and set it aside. It will not be reused.

4. Create the panel assembly. Join the Front (#5) and

Rear (#6) panels together using the two #6-32 Screws

(#18), #6 Flat Washers (#16), and #6 Kep Screws.

(#17). Note: The Tab on the Front Panel is to be be-

hind the Rear panel when properly installed.

5. Install the Filter Adapter (#6) onto the Front Panel as

shown using three 1/4-20 Button Head Screws (#12) and

1/4” Flat Washers (#13).

7. Place the 3/8 “ Well Nut into the hole in the inner

fender. It will be fully secured later in step 9.

6. Install one piece of the Edge Seal (#9) on the curved

edge of the Rear Panel and the other piece on the bot-

tom of the Front Panel.

8. Remove and save the factory 6mm fender bolt. It will

be reused in step 9.

NOTE: These instructions illustrate installa-

tions being performed on all three motors

available. While some details may vary from

vehicle to vehicle, the general install procedure

remains the same. Removal of the engine cov-

er is not mandatory, but recommended as it

will make installation easier on some models.

Full color instructions can be viewed on our

web site at Airaid.com. Use the Product

Search function to find your part number, and

click View Details.

Component Identification

1. Airaid Premium Filter 1

2. V6 Airaid Intake Tube 1

3. V8 Airaid Intake Tube 1

4. Rear Panel 1

5. Front Panel 1

6. Filter Adapter 1

7. Hump Hose 1

8. 22” Weather strip 1

9. 8 1/2”Edge Seal 2

10. 3/4” Hose 1

11. 5/8” Hose 1

12. 1/4-20 x 1/2” Button Head Bolt 4

13. 1/4” Flat Washer 4

14. 3/8-16x 1 1/4” Bolt 1

15. Flat Washer 1

16. #6 Flat Washer 2

17. #6-32 Kep Nut 2

18. #6-32 x 5/16” Pan Head Screw 2

19. 3/8-16 Well Nut 1

20. #72 Hose Clamp 2

21. #19 Speed Clamp 2

22. Line Holder 1

23. 3/4” Grommet 1

24. 5/8” Grommet 1

25. 3/4” Barbed Fitting 2

26. 3/4” Barbed 90 Deg. Fitting 1

27. 5/8” Straight Fitting 1

1 2

Summary of Contents

Page 1 - Component Identification

Installation Instructions For Part Numbers: 350-210 720-243 Airaid Oiled Media Filter 351-210 721-243 SynthaMax Dry Media Filter - Red 352-210 72

Page 2 - Double check your work!

Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com P/N 790-551 Aerosol Spray P/N 790-5

Related models: 351-210 | 352-210 | 353-210 |

Comments to this Manuals

No comments

Airaid 350-210 User Manual

Browse online or download User Manual for Air equipment Airaid 350-210. Airaid 350-210 User Manual

Summary of Contents

Related models: 351-210 | 352-210 | 353-210 |

Comments to this Manuals

Related products and manuals for Air equipment Airaid 350-210