Airaid 883-300 User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
12. Install the Hump Hose (#8) and Aluminum Intake
Tube (#3) onto the Fender adapter. Loosely install two
#48 Clamps (#8) onto the Hump Hose.
13. Install the Silicone Elbow (#7) and two #48 clamps
onto the Inlet a shown. Leave the Hose Clamps loose
for now.
10. Insert the Foam Pre Filter (#6) into the Snorkel Inlet
(#4) .
Page Two
REVDATE:01.07.14
14. Install the Snorkel Inlet and elbow onto the Intake
tube. Align the assembly into the desired position and
tighten all of the Clamps. Repeat steps 2-14 on the Pas-
senger side and re use the template, face down.
9. Re install the fender onto the vehicle, reusing the
nine fasteners from step 2.
15. Secure the snorkel assemblies to the roll cage us-
ing the Tube Mounts (#9) and #68 Clamps (#12).
Align the Snorkels to each other for symmetry.
16. Remove the access hatch in the bed and remove
the factory air filter from the airbox.
17. Apply the supplied silicone grease (#15) to both
sides of the sealing flange on the Airaid Premium Filter.
Install the filter as shown , flange first, with the domed
portion facing away from the engine.
18. Double check your work!
Make sure there is no foreign material in the in-
take path. Make sure all clamps, hoses, bolts, and
screws are tight.
Make sure all clamps, hoses, bolts, and screws
are tight. Periodically check the tightness of all
hose clamps.
Re-connect the negative battery cable and
re install the driver seat.
Filter Service
Airaid recommends following the manufac-
turers maintenance schedule for filter clean-
ings.
“Air filters should be inspected before each
ride. Filter and pre-filter need to be replaced at
least annually and more often if subjected to
severe use.”
The Airaid Filter is reusable and
should be cleaned using the Airaid Filter Tune
-Up Kit .
11. Install the Snorkel Screen (#5) onto the Inlet using
four 8-32 Button Head Screws (# 13) and a 5/32Allen
wrench.
Don’t Forget Your AIRAID Filter Tune-Up Kit!
P/N 790-551 Aerosol Spray
P/N 790-550 Squeeze Spray
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected]m www.airaid.com
Page view 1
1 2 3 4

Comments to this Manuals

No comments