Airaid 300-159 User Manual download pdf (Page 1)

Installation Instructions

For Part Numbers:

300-159 720-128 Airaid Oiled Media Filter

301-159 721-128 SynthaMax Dry Media Filter - Red

302-159 722-128 SynthaMax Dry Media Filter - Black

303-159 723-128 SynthaMax Dry Media Filter - Blue

2004-07 Dodge Ram 2500/3500

5.9L I6 Cummins Diesel

Note : Use P/N 300-147 For Vehicles with

optional “quiet hood pad”

Component Identification

1. Airaid Premium Filter 1

2. Front Air Dam Panel 1

3. Rear Air Dam Panel 1

4. Airaid Intake Tube 1

5. Air Filter Adapter 1

6. Weather Strip 24¼” 1

7. 6-32 x 5/16” Screw 4

8. #6 Flat Washer 4

9. 6-32 Keps Nut 4

10. ¼ -20 x 5/8” Hex Bolt 3

11. ¼” Flat Washer 3

12. 8-32 Button Head Screw 2

13. #8 Flat Washer 2

14. T20 Torx Bit 1

1. Disconnect the negative battery cable.

A.) Disconnect the Intake Air Temper ature

(IAT) sensor wir ing har ness by pushing down

on the tab, and sliding the connector back.

B.) Using the pr ovided T-20 torx bit, remove the

two IAT sensor mounting bolts and the sensor

from the tube (save for reuse).

2. Using a 7mm socket, loosen the hose clamp

where the factory intake tube connects to the

turbo housing.

4. A.) Loosen the hose clamp that secures the facto-

ry airbox lid to the intake tube assembly, and re-

move the assembly from the lid.

B.) Loosen the hose clamps above and below the

factory silencer tube. Remove the factory silencer

tube, and save the factory intake tubes.

3. Unlatch the three clips on the factory air box.

Remove the factory intake tube assembly and

airbox lid from the vehicle.

7. Install the Airaid Intake Tube assembly onto the

turbocharger inlet. Tighten the factory hose clamp.

5. Replace the factory silencer tube with the

Airaid Intake tube (#4). Complete the Airaid

Intake tube assembly by aligning the notches in

the tubes, and tightening the factory hose

clamps.

8. Assemble the Airaid Cool Air Dam (CAD)

panels (#2, #3) using four 6-32x 5/16” screws

(#7), #6 flat washers (#8) and 6-32 keps nuts

(#9).

6. Note: Each side of the Airaid Intake Tube has

notches that must be aligned with the notches on

the factory intake tubes. Also, the flow arrow

must point down towards the turbocharger inlet.

9. Mount the air filter adapter (#5) onto the CAD,

using three 1/4-20x 5/8” hex bolts (#10), and

three 1/4” flat washers (#11).

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

1 2

Summary of Contents

Page 1 - Installation Instructions

Installation Instructions For Part Numbers: 300-159 720-128 Airaid Oiled Media Filter 301-159 721-128 SynthaMax Dry Media Filter - Red 302-159

Page 2 - Tune-Up Kit!

Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com REV.11.4.13 P/N 790-551 Aerosol Spra

Related models: 301-159 | 302-159 | 303-159 |

Comments to this Manuals

No comments

Airaid 300-159 User Manual Page 1

Browse online or download User Manual for Air equipment Airaid 300-159. Airaid 300-159 User Manual

Summary of Contents

Related models: 301-159 | 302-159 | 303-159 |

Comments to this Manuals

Airaid 300-159 User Manual Page 1

Browse online or download User Manual for Air equipment Airaid 300-159. Airaid 300-159 User Manual

Summary of Contents

Related models: 301-159 | 302-159 | 303-159 |

Comments to this Manuals

Related products and manuals for Air equipment Airaid 300-159