Airaid 300-159 User Manual download pdf (Page 2)

Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected]m www.airaid.com

REV.11.4.13

P/N 790-551 Aerosol Spray

P/N 790-550 Squeeze Spray

10. Install the factory IAT sensor into the air

filter adapter using two 8-32 button head

screws (#12), and #8 flat washers (#13).

15. Double check your work!

Make sure there is no foreign material

in the intake path. Make sure all

clamps, hoses, bolts, and screws are

tight.

16. Reconnect the negative bat-

tery cable!

12. Slip the intake tube onto the air filter

adapter, and tighten the clamp.

13. Reconnect the IAT sensor wiring harness to

the sensor.

14. Install the Airaid Premium Filter (#1) onto the

air filter adapter, and tighten the clamp. Install the

weather strip (#6) onto the top of the CAD. (Hint:

start at one end, and work to the other).

11. A.) Install the CAD by inserting the four tabs

into the side of the factory airbox.

B.) Relatch the three airbox clips onto the CAD.

Thank you for purchasing the Airaid Intake System. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST weekdays for questions

regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully inspected and packaged. Check that no parts are

missing, or were damaged during shipping. If any parts are missing, contact Airaid. The air filter element is protected from direct exposure to wa-

ter and debris; care should be taken not to drive through deep water. WATER INGESTION IS THE DRIVERS RESPONSIBILITY! The air filter

is reusable and should be cleaned periodically.

FILTER IDENTIFICATION

720-128 Airaid Oiled Media 721-128 Airaid SynthaMax Dry Media - Red

722-128 Airaid SynthaMax Dry Media - Black 723-128 Airaid SynthaMax Dry Media - Blue

For your Oiled media filter we

suggest using the AIRAID Filter

Tune-Up Kit!

Synthamax Air Filters do not require oil.

Service air filter as needed by cleaning

with common non-petroleum all-purpose

household cleaner and water. Simple

Green®, Formula 409® or equivalent

works great. Apply cleaner to outside of

air filter and allow to soak. Then flush

filter clean from the inside out with a gar-

den hose and repeat steps if necessary.

Do not apply high pressure water or air

to clean filter. Allow filter to air dry and

reinstall.

1 2

Comments to this Manuals

No comments

Airaid 300-159 User Manual Page 2

Comments to this Manuals

Related products and manuals for Air equipment Airaid 300-159